GMP Standard Made of SUS304 Stainless Steel.Spray Dryers are relatively simple in operation which accept feed in fluid state and convert it into a dried particulate form by spraying the fluid into a hot drying medium.
Food atomization is done using high pressure nozzle, high pressure air, two fluid nozzles or centrifugal disc atomiser. The heating of drying air can be of either steam coils or thermic fluid or air heater according to the service conditions available. The hot air is distributed into the chamber from top by an air dispenser
It is an ideal equipment manufacturing: Zinc gluconate
Ferrous Gluconate
Copper Gluconate
Magnanese Gluconate
Manesium Gluconate
Cobalt Gluconate
Nickel Gluconate
Lithium Gluconate
Calcium Gluconate
Potassium Gluconate
Chromium Gluconate
Solid Gluconic Acid
The final product is taken out from the spray dryer along with air to a cyclone separator for fines separation and the final powder gets collected at the bottom. Additional systems like fines recycling into the chamber for agglomeration, powder cooling, conveying, storage & bagging can also be supplied.
Application:
Milk Powder - Ceramic Slurry
- Molasses
- Enzymes
- Calcium Chloride
- Herbal Extracts
- Ice Cream Mix Powder
- Whey Powder
- Polyvinyl Acetate
- Poly Aluminum Chloride
- Effluent Concentrates
- Instant Coffee
- Bakers Yeast
- Fruit Juice Powder
- Egg Powder
- Dyes
- Instant Tea
- Magnesium Chloride
- UF Resin
- Protein Hydrolysates
- Catalysts
- Instant Chicory etc
-
| item\parameter\spec | LPG |
| 5 | 25 | 50 | 100 | 150 | 200-2000 |
| inlet temperature | 140-350 automatically controlled |
| outlet temerature | ~80-90 |
| Max.water evaporation capacity | 5 | 25 | 50 | 100 | 150 | 200-2000 |
| centrifugal spraying nozzle transmission mode | compressed air transmission | Mechanical transmission |
| Rotation speed rpm | 25000 | 18000 | 18000 | 18000 | 15000 | 8000-15000 |
| sprayingdesc diameter mm | 50 | 100 | 120 | 140 | 150 | 180-340 |
| Heat supply | Electricity | Electricity+steam | Electricity+steam,fuel oil and gas | Settled by users themselves |
| Max.Electric heating power kw | 9 | 36 | 63 | 81 | 99 |
|
| overall dimensions m | 1.8×0.93
×2.2 | 3×2.7
×4.26 | 3.7×3.2
×5.1 | 4.6×4.2
×6 | 5.5×4.5
×7 | Depends on the concrete conditions |
| Dried powder restoring tate % | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 |
| Note:For the water evaporation capacity, material property,the inlet and outlet tempratures,please refer the following diagram for reference |